4.Connect the power cable and switch on the printer.
5.Print a MenuMap as follows to confirm the network interface card is correctly installed.
a.Press the MENU button twice to access the INFORMATION
MENU.
b. Press the SELECT button and confirm that PRINT MENU MAP is displayed.
c.Press the SELECT button to print the MenuMap.
d.Check that NETWORK MENU appears on the MenuMap.
ADDITIONAL MEMORY
Additional memory increases the printer’s capacity to process complex data.
•Installing additional memory is recommended if carrying out duplex printing or if error messages appear when printing complex data.
•Also used for graphic intensive applications on Networks.
•Additional memory is available in 64Mb, 128Mb, and 256Mb modules.
CAUTION!
•Due to the design of the memory modules, it is very important to install the modules in sequence according to the part number/capacity printed on the module
•Use the sequence Slot 1 Slot 3 Slot 2, placing the highest capacity (MB) module in Slot 1.
•If the modules being installed are higher in capacity than the one(s) already installed, remove the ones installed, sort them properly with the new ones and reinstall them in the proper 1 3 2 sequence.
For example:
SDRAM: | 256 MB | 128 MB | 64 MB |
Place in: | Slot 1 | Slot 3 | Slot 2 |
C7100/C7300/C7500 Accessories • 392
