STORE TO HARD DISK

Store to hard disk (job spooling) allows print jobs to be temporarily stored on the hard disk before printing.

NOTE

The internal hard disk must be installed in the printer and enabled to allow for spooling of the print job before final printing.

If the hard disk memory is insufficient for the spooled data, DISK FULL is displayed and only one copy printed.

If the software application being used has a collate print option, this must be turned OFF for store to hard disk to operate correctly.

Store to hard disk may not be available in some software applications.

1.Open the file in your application and select File ￿ Print.

2.In the print dialog box, click the appropriate OKI C9x00 driver, then click Properties (or Setup, or your application’s equivalent).

3.Click the Job Options tab.

C7100/C7300/C7500 Operation • 267

Page 268
Image 268
Oki C7100, C7300 manual Store to Hard Disk