Item

CYAN, MAGENTA, YELLOW OR BLACK DARKNESS

Color Menu (continued)

The default settings are bold.

ValueDescription

0+1+2+3-4-3-2-1 Adjusts Cyan, Magenta, Yellow or Black engine density.

Please do not change this setting.

ADJUST REGISTRATION

CYAN REGISTRATION - FINE ADJUST

MAGENTA REGISTRATION - FINE ADJUST

YELLOW REGISTRATION - FINE ADJUST

INK SIMULATION

INK LIMIT

CMY 100%

DENSITY

Execute

0+1+2+3-3-2-1

0+1+2+3-3-2-1

0+1+2+3-3-2-1

Off; SWOP

Darkk; Medium; Light

Disable; enable

When this menu is selected, the printer performs an Auto Adjust Registration.

Must be executed in the idle state (Auto Registration OFF).

Makes a fine adjustment to image registration in Cyan, Magenta or Yellow against Black in the horizontal direction. The adjustment is reflected as an offset (addition) value to the corrections through Auto color Registration Correction. Values are adjusted in increments of .026 mm. Example: if the paper movement is upward - if a value is increased (+) it means the image moves downward in relation to it.

The printer has its own process simulation generator which simulates standard colors in the printer.

This function is enabled only with Postscript language jobs.

Selects the limit of the toner layer thickness. If paper curl occurs in DARK printing, select MEDIUM or LIGHT. This sometimes helps reduce curl.

Selects enable/disable 100% output against the CMY100% TRC compensation. Ordinarily, the TRC compensation function controls the appropriate print density; thus, 100% output is not always enabled. Selecting ENABLE will allow 100% output. In actual printing, the TCR values, too, are controlled by color Matching. This function is used for special purposes; for example, to specify the color for CMYK color space in PS.

C7100/C7300/C7500 Setting up • 50

Page 51
Image 51
Oki C7300, C7100 manual ValueDescription