Troubleshooting

LCD MESSAGES

The liquid crystal display (LCD) on the control panel indicates the printer status and if there is a problem with the printer. Status and error messages are listed below together with an explanation of what each message means:

LCD Message

*****DRUM NEAR LIFE

*****EMPTY

*****NEAR END

*****TONER LOW

*****TONER SENSOR ERROR

BELT UNIT MISSING

CANCELLING JOB

CENTRO I/F ERROR

CHANGE ***** IMAGE DRUM

CHANGE BELT UNIT

CHANGE FUSER UNIT

CHANGE PAPER TO *****

CHECK *****

CHECK BELT UNIT

CHECK DUPLEX

Meaning

An image drum is nearing the end of its life. (***** indicates color)

Warning that Tray ***** is empty. MP Tray is Tray 0.

The paper in the selected ***** is nearly finished. (***** indicates paper tray).

Toner is low (***** indicates color).

Error with the toner sensor (***** indicates color). Call for service.

Transfer belt unit is missing.

Cancelling the current job.

Centronics interface error (parallel interface).

Change the image drum (***** indicates color).

Change the transfer belt.

Change the fuser unit.

Paper must be changed to correct paper size and/or media type (***** indicates size or media type).

Check Tray ***** for paper jam. MP tray is Tray 0.

Check the transfer belt for paper jam, correct installation, etc.

Check the duplex unit for paper jam, correct installation, etc.

C7100/C7300/C7500 Troubleshooting • 369

Page 370
Image 370
Oki C7100, C7300 manual Troubleshooting, LCD Messages