Oki C7100, C7300 manual Color Menu, Mode

Color Menu

The default settings are bold.

Item	Value	Description
AUTO DENSITY	Auto; Manual	Select whether density adjustment
MODE		and Toner Response Curve (TRC)
		compensation is automatic.
		Auto: Density adjustment is
		automatically run under specified
		conditions, and reflected in the TRC
		compensation.
		Manual: Density adjustment is done
		manually (see page 71).
ADJUST DENSITY	Execute	If EXECUTE is selected, the printer
		will immediately adjust density and
		reflect it in the TRC compensation.
		Density adjustment must be
		executed when the printer is idle. It
		may become invalid if executed in
		any other state.
COLOR TUNING	Print pattern	Prints the pattern for the user to
		manually adjust TRC. Ordinarily this
		function is not needed because TRC
		is automatically adjusted. This
		function permits TRC adjustment to
		your requirement by using the
		adjustment menu of HIGHLIGHT,
		MID-TONE, and DARK for each of
		CMYK. See page 71.
CYAN, MAGENTA,	0+1+2+3-3-2-1	Adjusts HIGHLIGHT (light area) of
YELLOW OR		Cyan, Magenta, Yellow or Black
BLACK		TRC.
HIGHLIGHT		Plus indicates adjustment toward a
		darker level and minus toward
		lighter.
CYAN, MAGENTA,	0+1+2+3-3-2-1	Adjusts MID-TONE of Cyan,
YELLOW OR		Magenta, Yellow or BlackTRC.
BLACK MID-TONE		Plus indicates adjustment toward a
		darker level and minus toward
		lighter.
CYAN, MAGENTA,	0+1+2+3-3-2-1	Adjusts DARK of Cyan, Magenta,
YELLOW OR		Yellow or Black TRC.
BLACK DARK		Plus indicates adjustment toward a
		darker level and minus toward
		lighter.

C7100/C7300/C7500 Setting up • 49