
2.Lower the printer gently on to the additional paper tray aligning the holes and connection socket on the base of the printer with the locating pegs and connector on the additional paper tray unit.
3.Connect the printer interface cable and power cable, then switch on the printer.
4.Print a Menu Map (see “Printing the MenuMap” on page 35) and check that TRAY 2 (and TRAY 3 if installed) appear under MEDIA MENU.
5.The printer will automatically configure to include this option.
6.In the printer driver(s), change the installed memory to match the new value:
–For Windows XP: see page 81
–For Windows 2000: see page 153
–For Windows Me/98/95 (PostScript driver only): see page 220
–For Windows NT 4.0: see page 285