DUPLEX UNIT
Installation
1.Switch off the printer and disconnect the power cable.
2.Open the front cover (1).
3.Insert the duplex unit (2) into the printer engaging the sides of the duplex unit in the slots in the printer.
4.Gently slide the duplex unit (2) fully into the printer.
5.Close the front cover (1).
6.Connect the power cable and switch the printer on.
7.The printer will automatically configure to include this option.
8.In the printer driver(s), change the installed memory to match the new value:
–For Windows XP: see page 83
–For Windows 2000: see page 155
–For Windows Me/98/95 (PostScript driver only): see page 221
–For Windows NT 4.0: see page 287
