System Configuration Menu, Auto emulation

System Configuration Menu

The default settings are bold.

Item	Value	Description
POWER SAVE	5 min; 15 min; 30 min;	Sets the time before printer enters
DELAY TIME	60 min; 240 min.	power save mode.

PERSONALITY	Auto emulation;	Selects the printer emulation
	PCL; IBM PPR III XL;	language. Note: the only printer
	Epson FX; Adobe	languages that can be selected are
	PostScript	those enabled in the Personality
		section of the Maintenance
		menu.
USB	ASCII	Specifies PostScript (PS)
PS-PROTOCOL	RAW	communication protocol mode of
		data from USB. (In RAW mode,
		Ctrl-T is invalid.)

NETWORK	ASCII	Displayed this Item when OkiLAN
PS PROTOCOL	RAW	7300e is installed.
		Specifies PS communication
		protocol mode of data from OkiLAN
		7300e .
		(In RAW mode, Ctrl-T is invalid.)
CLEARABLE	On; Job	PCL emulation: Sets the time before
WARNING		deleting error messages. If On,
		press Error Delete switch to display
		error. If Job, error remains displayed
		until next print job is received.
		PS emulation: Error messages are
		only shown during job regardless of
		setting.

AUTO	On; Off	Sets the printer to automatically
CONTINUE		recover after a memory overflow or
		print overrun.
MANUAL	60 sec; 30 sec; Off	This parameter sets the period of
TIMEOUT		time, that after requesting paper to
		be inserted and is not inserted,
		when the print job is cancelled.
		Only works in PostScript mode.

WAIT TIMEOUT	Off; 5 sec to 300 sec;
	default = 40 sec

Sets the time between receiving the last byte of data and the page being automatically ejected.

Only works in PCL mode. In PS mode the job will be cancelled.