COPY FUNCTIONS
4 Press the [AUTO IMAGE] key (AUTO % ).
The AUTO IMAGE indicator (AUTO % ) lights
AUTO % up and the appropriate ratio for the original size and paper size is selected. (The indicator of the selected ratio will light up.)
5 Set the number of copies and other copy settings, and then press the [START] key (
).
The copy will be delivered to the paper output tray.
Note To cancel automatic ratio selection, press the [AUTO IMAGE] key (AUTO % ) again.
Note | • If the ORIGINAL SIZE indicator blinks, |
change the orientation of the placed original. |
• If the copy is made when a PRESET RATIO
selector indicator is blinking, the copied | 2 | |
image may run off the page. | ||
|
MANUAL RATIO SELECTION
Copies can be reduced down to 25% or enlarged up to 400%. The [PRESET RATIO] selector keys ( 
, 
) can be pressed to quickly select a ratio from among eight preset ratios. In addition, the [Zoom] keys ( 
, 
) can be pressed to select the ratio in increments of 1%.
1 Place the original(s) in the document feeder tray or on the document glass.
2 If the original is placed on the document glass, select the original size. (p.18)
3 Use the [PRESET RATIO] selector keys ( 
, 
) and [Zoom] keys ( 
, 
) to select the desired copy ratio.
When a [Zoom] key (
or 
) is pressed, the ZOOM indicator will light up and the zoom ratio will appear in the display for about two seconds.
• To verify a zoom setting without changing
Note the zoom ratio, Hold down the [Copy ratio display] key (
). When the key is released, the display will return to the number of copies display.
• If the copy is made when a PRESET RATIO |
selector indicator or the ZOOM indicator is |
blinking, the copied image may run off the |
200%
141
122
115
100%
86
81
70
50%
ZOOM 25
400%
Selecting a preset ratio
Press the [PRESET RATIO] selector key ( 
) to move up through the preset ratios.
Press the [PRESET RATIO] selector key ( 
) to move down through the preset ratios.
Fine adjustment of the ratio
Any ratio from 25% to 400% can be set in increments of 1%.
page. To ensure that the image fits on the |
page, lower the copy ratio until the indicator |
stops blinking and lights steadily. |
• If the PAPER SIZE indicator is not lit, there |
is no appropriate paper. Load appropriate |
paper in a paper tray. (p.14) |
4 Set the number of copies and other copy settings, and then press the [START] key (
).
The copy will be delivered to the paper output tray.
To return the ratio to 100%, press the Note [PRESET RATIO] selector key ( 
or 
)
until the 100% indicator lights up.
Press a [PRESET RATIO] selector key ( 
or 
) to set the approximate ratio, then press the [Zoom] keys ( 
or 
) to increase or decrease the ratio.
To decrease or increase the zoom ratio rapidly, hold down the [Zoom] keys (
or 
).
23
