Panasonic AG-HPG20, AG-HPG20E, AG-HPG20P Saving USER files on SD cards, and press, 6 Using or, To load a file, 3 Press [MENU/MODE CHK], To give titles to files, 5 Select “FILE SELECT”, and press

Up to four sets of settings can be saved as four files on the SD card, and they can be loaded from the card.

•The menu setting value on the thumbnail display screen cannot be saved or loaded.

1 Insert the SD card to the SD card slot.

2 Press [THUMBNAIL/MODE] to display the normal display screen.

3 Press [MENU/MODE CHK].

4 Select “USER FILE” on the setting menu “CARD FUNCTIONS”, select “CHANGE”, and press .

•Basic operations on the setting menus (Page 88)

CARD FUNCTIONS

USER FILE		RETURN
SD CARD FORMAT		CHANGE

5 Select “FILE SELECT”, and press .

7 Using and , select “WRITE”, and press .

USER FILE (SD CARD)

8 Display “YES” using and , and press .

•In the figure below, “TITLE1” is the filename.

•After the data has been saved, “WRITE OK” is displayed.

•The USER file which was written changes to a white display.

USER FILE (SD CARD)

WRITE FILE 1

YES - - - - PUSH SET

TITLE EDIT

TITLE1

9 Press [MENU/MODE CHK] four times to display the normal display screen.To give titles to files

1)Perform steps 1 to 7.

2)Select the characters using and , and move to the next character using .

•The number of characters which can be input is 8.

•Any of the following characters can be input. (Space), A to Z, 0 to 9, : ; < = > ? @ [ \ ] ^ _ -. /

•All the characters can be deleted using the unit’s [RESET] button.

3)After all the characters have been input, press

at the left end of the characters (or at the right end), display “YES” using , and press .

•After the data has been saved, “WRITE OK” is displayed.

To load a file

1)Perform steps 1 to 6.

2)Move to “READ” using and , display “YES”, and press .

• The files are loaded.

3)If “TURN POWER OFF” appears after loading,

turn off the power, and then turn it back on. The loaded files are now set.

To reload the files from the SD card:

1)Perform steps 1 to 4.

2)Using and , move to “TITLE RELOAD”, display “YES”, and press .

• The files are now re-loaded.

•If “WRITE NG FORMAT ERROR” is displayed, format the SD card. (Page 33)

•If “WRITE NG WRITE PROTECT” is displayed, release the SD card protection.

•If “WRITE NG CANNOT ACCESS” is displayed, complete the other operations (such as playback), and then proceed to operate.

•If “WRITE NG ERROR” is displayed, the SD card may be defective. Replace the card.