Connecting the hard drive for use

Importing data from a hard drive to P2 cards
Importing Data by the partition from TYPE S Hard Disk or P2 store

You can import data (load data from the hard drive to a P2 card) at one partition at a time (one card at a time) onto a P2 card of the same model number as the original card.

1 Insert the P2 card that will serve as the import destination.

Insert the P2 card which has been formatted.

2 Press [MENU/MODE CHK].

3 Using , and , select “HDD” – “EXPLORE”, and press .4 Using and , select the copy source partition, and press .5 Press [MENU/MODE CHK].6 Using , and , select “OPERATION”– “IMPORT” – “ALL CLIP”, and press .7 Move the cursor to the number of the

P2 card slot which serves as the import destination and which contains a formatted P2 card, and press .

8 Select “YES”, and press .

Importing now begins.

When importing is completed, “COPY COMPLETED!” appears on the screen.

•When data has been imported to a P2 card which is different from the source P2 card, some clips may be incomplete (in which case, they will be indicated by the ! indicator). If this is the case, use the connecting function to reconfigure these clips. Refer to “Connecting incomplete clips” (Page 41).

•Using a menu setting, you can choose whether to verify the two sets of data when copying.

•It is not possible to import data one partition at a time onto a P2 card of a different model number. Instead, import data one clip at a time.

Importing Data to a P2 Card by the clip

You can select the hard drive clips, and import them onto a P2 card.

1 Insert the P2 card that will serve as the import destination.

2 Press [MENU/MODE CHK].

 

3 Using

,

and

, select “HDD” –

 

“EXPLORE”, and press .

 

4 Using

 

and , select the copy sourcedata
partition, and press .
5 Select the clip to be copied.

Saving

 

6 Press [MENU/MODE CHK].

 

7 Using

,

and

, select “OPERATION”

 

–“IMPORT” – “SELECTED CLIPS”, and press .

8 Using and , select the number of the P2 card slot whose data is to be imported, and press .

9 Select “YES”, and press .

Importing now begins. When importing is completed, “COPY COMPLETED!” appears on

the screen.

•Verifying is not executed when importing one clip at a time.

•For the precautions to be observed when importing one clip at a time, refer to “Copying clips” (Page 42).

•You cannot import to the P2 card clips whose size is larger than the capacity of the P2 card.

77