List of setting menus (continued)

TIMECODE SETUP screen (continued)

Item

 

Description of settings

 

 

 

VITC POS-2

This is used to set the insert position of VITC signal.

 

(When 59.94 Hz has been set)

 

10L

 

 

I

 

18L

 

 

I

 

20L

 

(When 50Hz has been set)

 

7L

 

 

I

 

13L

 

 

I

 

22L

 

<Note>

 

•

You cannot select the same line as the lines for “VITC POS-1” on the “TIMECODE

 

 

SETUP” screen or “UMID POS” on the “AV OUT SETUP” screen.

 

•

This setting is effective only for VIDEO output and SD-SDI output.

HD EMBD VITC

This is used to set whether to superimpose the VITC information onto HD-SDI output

 

or not.

 

ON:

 

 

Superimpose

 

OFF:

 

 

Not superimpose

HD EMBD LTC

This is used to set whether to superimpose the LTC information onto HD-SDI output

 

or not.

 

ON:

 

 

Superimpose

 

OFF:

 

 

Not superimpose

The underlined settings are the factory mode settings.

96