Screen displays (continued)

: Normal playback

: Playback pause

REPEAT : Repeat playback

1CLIP : Single clip playback

1CLIP R : Single clip repeat playback

( ) :

Rapid forward playback (rapid reverse playback)

  (

  ):

Forward frame feed playback (reverse frame feed playback)

x /x (x /x ):

Forward variable-speed playback (reverse variable-speed playback)

CLIP   (CLIP   ):

Forward clip feed (reverse clip feed)

15HDD easy playback display

This is displayed during easy playback from the hard drive. When playback performance deteriorates, the display blinks for 3 minutes. When the hard drive is damaged or vibrations are added to the hard drive, the display may become incorrect.

16Repeat playback setting display

This appears when “ON” has been selected for the “REPEAT PLAY” item on the setting menu

“PLAYBACK FUNCTIONS”.

17Remaining battery charge display

As the remaining charge drops, the display

changes in the following sequence: and . When the charge is low, “LOW BATTERY” appears on the LCD monitor.

(While the AC adapter is being used, a display

other than may appear: this is normal and is not a sign of trouble.)

18Media information displays

The card slots in which P2 cards have been inserted and the basic information on the cards are displayed.

1 2 Lighted:

 

Recordable P2 card

1

2

Lighted in green:

 

P2 card targeted for recording

1

2

Blinking:

 

Card recognition underway

 

 

:

 

No card inserted

P: Write-protected card F : No memory remaining

X : Card cannot be recognized

E : Improperly formatted P2 card (which can be used if it is formatted properly)

19Remaining media memory displays

The amount of memory remaining on the card in the slot targeted for recording is displayed when “ONE CARD” is selected for the “P2CARD REMAIN” item on the setting menu “DISPLAY SETUP”. The target slot can be switched to another slot using “SLOT SEL” assigned to [USER]. When “TOTAL” is selected, the total amount of memory remaining on the two cards is displayed.

20Monitor volume level meter

When is pressed, the level of the volume which is output from the speaker and headphone jack is displayed.

You can adjust the volume level using the and buttons.

During variable-speed playback, while holding down [ALT/3], press and button to adjust the volume.

Major warning displays

This section provides major warning displays which are displayed on the LCD monitor. For other warning displays, check the displayed messages.

■C

CANNOT ACCESS!

Data cannot be accessed because of a problem in the content or for some other reason. Restore the media or clips to the normal operating status, and then use the data.

CANNOT ACCESS CARD!

An error occurred while accessing the P2 card. Check the P2 card.

CANNOT ACCESS TARGET!

An error occurred while accessing the connection destination target. Check the hard drive status and connections.

CANNOT DELETE!

Data cannot be deleted because of a mismatch in the content versions. Ensure that the same content version as the device is used.

CANNOT FORMAT!

The P2 card cannot be formatted because of a problem. Check the P2 card.

82