Copying data from P2 cards to the hard drive (continued)

Thumbnail displays of clips on the hard drive

You can also display and manage thumbnails of the clips stored on the hard drive just as you can with clips on the P2 cards installed in the unit.

1 Display the HDD EXPLORE screen.2 Using and , select the partition to be displayed, and press .

The clips of the partition are now displayed as thumbnails.

4) Disk information

NUMBER (NO.): Partition number (1 to 23)

 

PARTITION:

Type of the hard disk is

 

 

displayed. (Page 69)

 

DATE/TIME:

Partition recording date/time

 

VERIFY:

Setting for verifying during

 

 

recording, and verifying results

 

 

ON/

The two sets of data

 

 

FINISHED: have been verified

 

 

 

and found to match.

 

 

ON/

The two sets of

 

 

FAILED:

data have been

 

 

 

verified and found

 

 

 

not to match.

 

 

OFF:

The two sets of data

 

 

 

were not verified.

 

 

• “– –” is displayed in the case

 

 

of a P2 store hard drive.

 

NAME:

Partition name

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• When the menu is displayed and “EXIT” is

 

 

 

 

 

 

 

 

 

selected, the HDD EXPLORE screen is restored.

 

 

 

 

 

 

 

 

 

• If necessary, you can change the displays on the

 

 

 

 

 

 

 

 

 

thumbnail display screen. The steps taken to do

 

 

 

 

 

 

 

 

 

this are the same as for the thumbnail displays

 

 

 

 

 

 

 

 

 

for cards. Refer to “Changing the displays on

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the thumbnail display screen” (Page 38). Other

 

 

 

 

 

 

 

 

 

1)

 

 

 

 

 

 

 

 

operations (repair, connect, adding text memo,

 

 

 

 

 

 

 

 

etc.) are not available.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Clips can be deleted from the thumbnail display

 

 

 

 

 

 

 

 

 

screen of the FAT type of hard drive, but other

 

 

 

 

 

 

 

 

 

operations (repair, connect, adding text memo, etc.)

 

 

 

 

 

 

 

 

 

are not available.

 

 

 

 

 

 

 

 

 

• With a FAT type of hard drive, clips after the first

 

 

 

 

 

 

 

 

 

thousand clips will not be displayed.

 

 

 

 

 

 

 

 

4)

• DATE/TIME is displayed in Coordinated Universal

 

 

 

 

 

 

 

 

2)

 

 

 

 

 

 

 

Time (UTC) with the P2 store hard drive.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Displaying the clip information on the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

hard drive

3)

1)Display statuses

Displays the thumbnail display status of the hard drive clips.

2)Partition information

The following information is displayed.

SERIAL: Serial number of P2 card

MODEL: Model name of P2 card

3)Recording mode and system format

The recording mode of the clip at the cursor position and system format are displayed.

You can display detailed information about clips on the screen, and check it. This information is the same as the properties of the clips on the P2 cards.

1 Select the target clip on the thumbnail display screen of the hard drive.

You can display detailed information about clips on the screen, and check it.

2 Press [MENU/MODE CHK].

3 Using , and , select “PROPERTY”–

“CLIP PROPERTY”, and press . For details, refer to “Displaying the clip information” (Page 43).

76