PLAYBACK FUNCTIONS screen (continued)

Item

 

Description of settings

 

 

SDI IN LOCK

This is used to select whether the P2 playback output signal is locked (synchronized)

 

to the SDI input signals.

 

INT:

 

 

It is not locked (synchronized).

 

INPUT:

 

When the SDI input signal is present, it is locked (synchronized) to the input signal.

 

It is not locked (synchronized) when the input signal is not present.

 

<Note>

 

When SDI is set on the setting menu “INPUT SELECT” and the same SDI input signal

 

as the one set on the setting menu “SYS FORMAT” is input, the output signal is

 

locked (synchronized) to the SDI input signal in EE/recording condition regardless of

 

the setting for the setting menu “SDI IN LOCK”.

SPEED MAX

This is used to set the maximum speed of the variable-speed playback and rapid

 

forward/rapid reverse playback.

 

X32:

32x speed

 

X60:

60x speed

 

X100: 100x speed

SEEK POS

When using the navigation buttons to jump to the next clip, this menu item controls

 

whether the unit will jump to the beginning of the next clip, or to the next text memo

 

position.

 

CLIP: The beginning of the clip

 

CLIP&TMEMO: The beginning of the clip and text memo setting point

AV OUT SETUP screen

Item

 

Description of settings

 

 

 

 

 

 

SDI SEL

This is used to set the video signal output from HD/SD-SDI OUT connector.

 

 

 

(When the 59.94 Hz system format is set)

 

 

 

AUTO:

 

 

 

The output is automatically switched according to the clip format during playback.

 

 

 

The output is automatically switched according to the setting menu “SYS FORMAT”

 

 

 

during situations other than playback.

 

 

 

1080i: 1080/59.94i

 

 

 

720P: 720/59.94p

 

 

 

480i: 480/59.94i

 

 

 

(When the 50 Hz system format is set)

 

 

 

AUTO:

 

 

 

The output is automatically switched according to the clip format during playback.

 

 

 

The output is automatically switched according to the setting menu “SYS FORMAT”

 

 

 

during situations other than playback.

 

 

 

1080i: 1080/50i

 

 

 

720P: 720/50p

 

 

 

 

 

576i: 576/50i

 

Menu

SDI OUT

This is used to set the SDI output.

 

 

ON: SDI signals are output.

 

 

 

 

 

OFF:SDI signals are not output.

 

 

SDI EDH

This is used to set whether to superimpose error detection handling (EDH) when SD-

 

 

 

SDI signals are output.

 

 

 

ON: EDH is superimposed.

 

 

 

OFF:EDH is not superimposed.

 

 

 

 

 

The underlined settings are the factory mode settings.

 

99