TIMECODE SETUP screen (continued)

Item

Description of settings

 

 

VITC BLANK

This is used during playback to set whether to output VITC signal to the position set

 

on the setting menu “VITC POS-1” or “VITC POS-2”.

 

BLANK:

 

Not output

 

THRU:

 

Output

 

<Note>

 

This setting is effective only for VIDEO output and SD-SDI output.

VITC POS-1

This is used to set the insert position of VITC signal.

 

(When 59.94 Hz has been set)

 

10L

 

I

 

16L

 

I

 

20L

 

(When 50Hz has been set)

 

7L

 

I

 

11L

 

I

 

22L

 

<Note>

 

• You cannot select the same line as the lines for “VITC POS-2” on the “TIMECODE

 

SETUP” screen or “UMID POS” on the “AV OUT SETUP” screen.

 

• This setting is effective only for VIDEO output and SD-SDI output.

Menu

The underlined settings are the factory mode settings.

95