Deleting text memos

1 Perform the operation from steps 1 to 4 in “Playback from text memo position”, and move to the bottom of the text memo screen.

2 Move the cursor to the text memo to be deleted, and press .

A multiple number of text memos can be selected.

3 Press [MENU/MODE CHK], and then select “OPERATION” – “DELETE” using , and .4 Select “YES”, and press .

The text memo is now deleted.

Dividing and copying clips using text memos

1 Perform the operation from steps 1 to 4 in “Playback from text memo position”, and move to the bottom of the text memo screen.

2 Move the cursor to the text memo to be copied, and press .

A multiple number of text memos can be selected.

3 Press [MENU/MODE CHK], and then select “OPERATION” – “COPY” using , and , and press .

4 Using or and , select the slot with thecopy destination card, select “YES”, and press .

Copying is now executed.

5 When the completion message has appeared, press “OK” ().

•The block between the selected text memo and the next text memo is copied. If there is no text memo after the selected text memo, the block from the text memo position to the end of the clip will be copied.

•While copying is underway, the progress made in copying and cancel are displayed. To stop the

copying at any time, press . The “YES/NO” confirmation screen now appears. Using and , select “YES”.

Replacing thumbnail images

The thumbnail display image of clip can be replaced with the still image at the text memo position.

1 Perform the operation from steps 1 to 4 in “Playback from text memo position”, and move to the bottom of the text memo screen.

2 Using or , move the cursor to the text memo still image you wish to make the thumbnail display image.

3 Press [MENU/MODE CHK].

4 Using , and , select “OPERATION”

– “EXCH. THUMBNAIL”, and press .

5 Select “YES”, and press .

The thumbnail display image is replaced with the still image at the cursor position.

•You can view the thumbnail change position (number of frames from the start) using the clip information display “THUMBNAIL” item (Page

44). “0” is normally displayed for the thumbnail of the start frame.

•Playback from a thumbnail begins from the start of the clip even when the thumbnail has been changed.

Playback

61