Panasonic CF-30KTPAXxM Setting the I/O PCB, O㩷sub Pcb, Paste Insulation with a chassis

9.2.8.Setting the I/O PCB

1.Open the Connector Cover and Lid Cover.

2.Fix the I/O PCB using the 3 Screws <N15> (No1 to No3).

3.Fix the I/O PCB using the 4 Screws <N14> (No1 to No4).

4.Fix the I/O PCB using the 2 Screws <N30> (No1 to No2).

Connector	I/O PCB
(CN701)					No.1
Connector				No.2
(CN700)		No.1	<N15>No.2		<N30>
				<N14>
Connector Cover	No.3<N15>				No.2
	<N15>			No.4	<N30>
				<N14>	No.3
					<N14>
					No.1
					<N14>
					LID
					Cover

Note:

Tighten the Screws in the numbered order (No1 to No3).

Tighten the Screws in the numbered order (No1 to No4).

Tighten the Screws in the numbered order (No1 to No2).

Screws <N14>: DFHE5058ZB

Screws <N15>; DRHM5104ZA

Screws <N30>; DXHM0057ZA

■ Assembly of I/O SUB PCB

<Notes>
1.Apply the load when attaching the attaching parts. 20 30䰚䯴2	3Kgf䯵/cm2

Reusing the attaching parts is impossible

Torque of tightening screw :0.19 ± 0.02N·m( 1.9 ± 0.2kgf·cm)

CAUTION

S1:Insulation S2:Bitten S3:Sharp Edge S4:Part No. Check S5:Other

	S1
I/O㩷SUB PCB	IO PCB Sheet
	Paste

Insulation with a chassis

Substrate end face adjustment Less than 0.5mm of difference

Tighten Screw

9-21