Panasonic CF-30KTPAXxM Setting the KB Cable Cover, Keyboard and LCD Cable Cover, Cable Sheet

■Cautions for Setting GPS ASSY and BT PCB ASS’Y

<Notes>

1.Do not gouge when inserting and removing the plug.

2.Do not damage the coating when handling the Cable.

S2

		CABLE SHEET
Pass the Cable		Attach
behind the	S2
Cabinet protrusion

CAUTION	S1:Insulation S2:Bitten S3:Sharp Edge
	S4:Part No. Check S5:Other

TOP CASE SHEET	Match to the level edge
Attach	of Cabinet

㪇 㪉

Cabinet Level Standard Tolerance 0 to 1

Process the wire into the groove

CABLE SHEET

Attach

Wire process: Fit to the plate squeeze line

	Tape
	Attach		Tape
			Attach
Match to the boss center.		2

㪇 㪉

㪊 㪈

㪏 㪈

㪏 㪉

Insert the

Cable plug

WHIP ANT CABLE SUB ANT CABLE MAIN ANT CABLE

Do not protrude	Ensure the Cable
from this side
	does not come over
	the cushion.
Cross-section view of cushion

<Note>

Each Cable must fit

in the slit of ANT Cable cushion securely.

The Cable must not cross

at the ANT Cable cushion part.

9.2.16. Setting the KB Cable Cover, Keyboard and LCD Cable Cover

1.Set the Keyboard on to the Computer.

2.Connect the 2 Cables to the 2 Cables (CN13,CN14).

3.Fix the KB Cable Cover using the 7 Screws <N29> (No1 to No7).

4.Fix the LCD Cable Cover using the 3 Screws <N29> (No1 to No3).

Note:

Tighten the Screws in the numbered order (No1 to No7). Tighten the Screws in the numbered order (No1 to No3).

Screws <N29>: DRQT26+E3FNL

		No.3	No.2
			<N29>
		<N29>	No.7
	No.4	No.1
to Connector		<N29>	<N29>
	<N29>		No.5
(CN14)
			<N29>
No.6			KB Cable Cover
<N29>			No.2
to Connector			<N29>
			No.3
(CN13)			<N29> No.1
			<N29>
			LCD
			Cable Cover

Keyboard

Connector

(CN14)

Connector

(CN13)

9-34