Panasonic CF-30KTPAXxM service manual Sec

* Notes:

1.Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2

HDD Thermal Plate

When attaching HDD Cushion Plate and HDD Cushion (Black), set the bending part of the metal plate up.

	0~1
1~3		1~3

1~3 0~1 1~3

(15)

0–1

Do not bend it at a sharp angle to put natural R.

To the level of attaching closely in this range

Attach the HDD Cushion (Black)

Attach the

HDD thermal Plate

HDD Cushion

(Black)

Metal Plate

Longer Direction

Attach the HDD Cushion (Yellow)

Attach the HDD Cushion (Yellow)

*Ensure the	I get a gap for ￿
direction is right.	breathing hole
(lateral)	securement.

Put the edge on the same line. Difference: 1

*Notes:

1.Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2

Paste the cushion with pressing in the direction of arrow.

(2)

B-B SEC

Make the black damper get into the both sides of the green damper.

			Right and left position: Match to the center
	A		Top and bottom position: Match the edge of the base
					material transparent sheet
(20)					to the bottom side
		HDD Side Damper
		is installed		(0)

A HDD Side Damper Lower Case

B B

0~0.5 (Entire Circumference)

A-A SEC

HDD Bottom Case Ass’y

9-39