Panasonic CF-30KTPAXxM service manual Assembly of Main PCB, Chassis

■Assembly of Main PCB

*Notes:

1.Apply the load when attaching the parts. 20N ~ 30N (2 ~ 3Kgf)/cm2

S3	To prevent the
	Part edge from
Safety Working
	touching the

To prevent the mounted parts from touching the Steel Plate.

S3

Cable SATA Signal

Insertion

Insert the connector wrapped with the sheet into the conn- ector on the board.

1 ~ 2

Bend the cable avoiding the connector.

Attach the PET Sheet Card FPC.

	0 ~ 1
0 ~ 1

Safety Working

Sheet wrap

CAUTION	S1:Insulation S2:Bitten S3:Sharp Edge
	S4:Part No. Check S5:Other

Connect the LAN cable.

Put the cable ina a U-shape into the intermediate chassis aperture next to the connector.

Do not pinch the cable out of the USB PCB.

Safety Working S2

MCH HEAT RUBBE Set

0~2

CHASSIS

0~0.5

PWB SHEET Attach.

Fold and attach the back side.

MCH INS SHEE Set

Fix with Screws in order of the rear number of No.	(Notes)
	1. Apply the load when attaching the attaching parts. 20~30N (2~3Kgf)/cm2
Ex.) Fix in order of 3 -1 to 3 -2.	2. Reusing the attaching parts is impossible.

9-26