Recording pictures (basic)
Taking Pictures using Auto Bracket
This mode allows you to take pictures automatically according to the compensation range of the exposure by pressing the shutter button only once.
You can select the picture with the desired exposure among different exposures.
Preparation
• Set the operational mode dial except for [ 
]. (P29)
1Press [ 
] until
[ 
AUTO BRACKET] appears on the screen to set the
compensation range of the exposure.
AUTO BRACKET
FRAMES 
SET
REVIEW | REVIEW |
•You can select the auto bracket from 0 (OFF), n1/3 EV, n2/3 EV and n1 EV.
•You can set the number of recording to 3 or 5 by pressing 3.
¬Suggestions/Tips ¬
•The auto bracket icon appears on the lower left of the screen.
•When taking pictures using auto bracket after the exposure compensation, the pictures are based on the compensated exposure. When the exposure is compensated, the compensated exposure value appears on the lower left of the screen.
•When the flash is activated, you can take only 1 picture. Auto bracket setting cannot be cancelled.
•When setting auto bracket, you cannot take a picture with audio.
•When setting auto bracket and the burst mode simultaneously, auto bracket will be performed.
•The exposure may not be compensated with auto bracket depending on the brightness of the subject.
•When setting the quality to [ RAW ], you cannot take pictures with the auto bracket.
•You cannot set the number of recording to 5 when the picture size is set to 2560k1920 pixels and the quality is set to [ 
] (Super Fine).
48
