Panasonic DP-2500/3000 manual 157, Explanation of contents

Journals and Lists

Explanation of contents

(1)Printout date

(2)Printout time

(3)Journal number

(4)Communication result

(5)Number of pages transmitted or received

(6)File number

(7)Duration of communication

(8)Type of communication

(9)Remote station identification

(10)Communication date

(11)Communication Start time

(12)Diagnostic

(13)Own LOGO

(14)Own ID number

(15)Own Character ID

(16)Type of communication

(17)Destination

(18)Received remote station's ID

(19)Resolution:

(20)Line Number

:"OK" indicates that the communication was successful.

"BUSY" indicates that the communication has failed because of busy line. "STOP" indicates that STOP was pressed during communication.

"B-OK" indicates that the Batch Transmission was successful. (All batched files are listed below the batched transaction.)

"M-OK" indicates that the substitute reception message in memory was not printed.

"P-OK" indicates that memory overflow or document misfeeding occurred while storing the documents into memory for transmission but successfully stored document(s) was sent.

"R-OK" indicates that the Relayed XMT or Confidential Communication was successful.

"3-digit Info Code" (See page 169) indicates that the communication has failed.

:The 3-digit number is the number of pages successfully transmitted or received. When the documents are stored into memory, two 3-digit numbers will appear. The first 3-digit number represents the number of pages successfully transmitted. The second 3-digit number represents the total number of pages that were attempted to be transmitted.

Asterisk "*" indicates that the quality of some received copies was poor.

:001 to 999 (If the communication is stored into memory, a file number is assigned for each communication.)

:"XMT" means Transmission "RCV" means Reception "POL" means Polling "PLD" means Polled "FWD" means Fax Forward

:Name : Recorded name in Phone Book. Numbers or remote station's Character ID.

☎ number : Dialled telephone number (PIN code will not be shown)

Number : Remote station's ID number.

"◆" means communicated from optional 2nd G3 Fax Communication Port Kit. (Line-2)

:For service personnel only

:Up to 25 characters

:Up to 20 digits

:Up to 16 characters

:Transmission or memory transmission

:If a Phone Book Number was used for transmission: Phone Book Number/Telephone Number/Recorded Name If not : Telephone number

:Character ID or ID number

:"STD" means Standard resolution "FINE" means Fine resolution "S-FINE" means Super-Fine resolution

PRINTOUT JOURNALS AND LISTS

157