1. Introduction and Installation
11
LMake sure the blue gear (2) and white gear (3)
are installed as shown.
5Turn the blue gear (4) in the direction of the arrow
until the ink film is tight (5) and at least one layer of
ink film is wrapped around the blue core (6). 6Close the back cover securely by pushing down on
the dotted area at both ends (7).
7Close the front cover securely.
3
2
4
5
Correct
Incorrect
6
Tight
1 turn
No ink film is wrapped around the blue core.
Slack/Crease Reverse
7
FP205-215AL-PFQX2516ZA-en.book Page 11 Thursday, July 13, 2006 9:31 AM