
9. Help
51
9.3.8 If a power failure occurs
LThe unit will not function.
LThe unit is not designed for making emergency telephone calls when the power fails. Alternative arrangements
should be made for access to emergency services.
LFax transmission and reception will be interrupted.
LIf delayed transmission (feature #25 on page 40) is programmed and a power failure prevents the document from
being sent at the set time, the document will be sent after power is restored.
LIf any fax documents are stored in the memory, they will be lost. When power is restored, a power down report will
be printed stating which documents in memory have been erased.
The other party complains
that they cannot leave a voice
message.
LThe recording time is set to “GREETING ONLY”. Select “1 MINUTE”, “2
MINUTES” or “3 MINUTES” (feature #10 on page 38).
LThe memory is full. Erase unnecessary messages (page 35).
LMake sure there is no other answering machine connected on the same
line.
Caller ID information does not
display during message
playback.
LThe caller information will not be displayed if a message is recorded by
using {MEMO} (page 35).
Problem Cause & Solution
FP205-215AL-PFQX2516ZA-en.book Page 51 Thursday, July 13, 2006 9:31 AM