8. Programmable Features
43
Setting recall time {#}{7}{2}The recall time depends on your telephone exchange or host
PBX.
{1} “900ms”
{2} “700ms”
{3} “600ms”
{4} “400ms”
{5} “300ms”
{6} “250ms”
{7} “200ms”
{8} “160ms”
{9} “110ms”
{*} “100ms” (default)
{0} “90ms”
{#} “80ms”
Note:
LIf the unit is connected via a PBX, this setting may need to be
changed in order for PBX functions (transferring a call, etc.) to
work correctly. Consult your PBX supplier for the correct
setting.
LIf you set the location setting to “NEW ZEALAND” (feature #74
on page 43), the default setting will be “600ms”.
Setting the location
where you use this unit
{#}{7}{4}This setting must match your location.
{1} “AUSTRALIA” (default): To use in Australia.
{2} “NEW ZEALAND”: To use in New Zealand.
Setting the connecting
tone
{#}{7}{6}If you often have trouble when sending faxes, this feature allows
you to hear connecting tones: fax tone, ring back tone and busy
tone. You can use those tones to confirm the status of the other
party’s machine.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): You will hear connecting tones.
Note:
LIf the ring back tone continues, the other party’s machine may
not be a fax machine or may have run out of paper. Check with
the other party.
LThe connecting tone volume cannot be adjusted.
Changing the receiving
mode in the AUTO
ANSWER setting (KX-
FP215 only)
{#}{7}{7}{1} “TAM/FAX” (default): Telephone Answering Machine/Fax
mode (page 27)
{2} “FAX ONLY”: Fax only mode (page 26)
Resetting advanced
features to their default
settings
{#}{8}{0}{0} “NO” (default)
{1} “YES”
To reset the advanced features:
1. {MENU} i {#}{8}{0}
2. Press {1} to select “YES”. i {SET} i {SET} i
{MENU}
LThe ECM setting (feature #68 on page 42) and the
location setting (feature #74 on page 43) will not be reset.
Feature Feature code Selection
FP205-215AL-PFQX2516ZA-en.book Page 43 Thursday, July 13, 2006 9:31 AM