4. Fax
22
4FaxSending Faxes
4.1 Sending a fax manually
1Adjust the width of the document guides (1) to fit
the actual size of the document.
2Insert the document (up to 10 pages) FACE DOWN
until a single beep is heard and the unit grasps the
document.
3If necessary, press {A} or {B} repeatedly to select
the desired resolution.
4Press {MONITOR} (KX-FP205)/{SP-PHONE} (KX-
FP215) or lift the handset.
5Dial the fax number.
6When a fax tone is heard:
Press {FAX START}.
When the other party answers your call:
Ask them to press their start button. When the fax
tone is heard, press {FAX START}.
LIf you pressed {MONITOR} in step 4, lift the
handset before speaking.
To select the resolution
Select the desired resolution according to the character
size.
–“STANDARD”: For normal-sized characters.
–“FINE”: For small-sized characters.
–“SUPER FINE”: For very small-sized characters.
–“PHOTO”: For photographs, shaded drawings, etc.
LUsing the “FINE”, “SUPER FINE” and “PHOTO”
settings will increase transmission time.
To redial the last number
{REDIAL} i {FAX START}
LIf the line is busy, the unit will automatically redial the
number 2 or more times.
LTo cancel redialling, press {STOP}.
To send more than 10 pages at a time
Insert the first 10 pages of the document. Add the other
pages (up to 10 at a time) on top of the previously
inserted pages while the last page is being fed into the
unit.
Pre-dialling a fax number
1. Enter the fax number.
2. Insert the document.
3. {FAX START}
Sending from memory (Quick scan feature)
To use this feature, activate feature #34 (page 41)
beforehand.
1. Insert the document.
2. Enter the fax number. i {FAX START}
LIf the document exceeds the memory capacity,
transmission will be cancelled and this feature will be
turned OFF automatically. You must send the entire
document manually.
LThis feature cannot be used if the handset is in use or
{MONITOR} (KX-FP205)/{SP-PHONE} (KX-FP215)
is pressed.
To stop sending
Press {STOP}.
Printing a sending report
A sending report provides you with a printed record of
transmission results (errors, etc.). To print sending
reports, make sure feature #04 is activated (page 38).
The default setting is “ERROR”. For an explanation of
error messages, see page 44.
Printing a journal report
A journal report provides you with a printed record of the
30 most recent fax transmissions and receptions. To
print it manually, see page 56. To print it automatically
after every 30 new fax transmissions and receptions,
make sure feature #22 is activated (page 40). For an
explanation of error messages, see page 44.
{REDIAL}
{FAX START}
{MONITOR} (KX-FP205)
{SP-PHONE} (KX-FP215)
{A}{B} {STOP}
1
FP205-215AL-PFQX2516ZA-en.book Page 22 Thursday, July 13, 2006 9:31 AM