Remote Operation (KX-FP85 only)

Operating from a remote location!

The following operations can be performed from a remote location using a touch tone telephone.

Program the remote operation ID (feature #11 on page 68) and set the unit to the TAD/FAX

mode before going out (p. 54).

Dial key

Remote command

Page

 

 

 

0

Skips the greeting message

63

 

 

 

1

Repeats a message

62

 

 

 

2

Skips a message

62

 

 

 

4

New message playback

62

 

 

 

5

All message playback

62

 

 

 

6

Room monitor (KX-FP85AL only)

63

 

 

 

7

Re-records a greeting message

63

 

 

 

Dial key

Remote command

Page

 

9

Stops re-recording of a greeting

63

 

 

message

 

 

4

Erases a specific message

63

 

5

Erases all messages

63

8

0

Changes to the TEL mode

63

8

1

Turns ON message transfer

63

8

2

Turns OFF message transfer

63

8

3

Turns ON pager call

63

8

4

Turns OFF pager call

63

Remote operation card

Please copy, cut out and carry this card for assistance when using the remote operation.

Answering Device Remote Operation

Notice of Remote Operation

1.Call your unit.

2.Enter the remote operation

ID during the greeting message.

The new messages will be played automatically.

If there are no new messages, wait for 4 seconds. All the messages will be played back.

3.Press the remote command key(s) within 10 seconds (see the reverse side).

Fold here

The remote operation is available only from a touch tone telephone when the unit is in the TAD/FAX mode.

When the unit is in the TEL mode, call your unit and wait for 10 rings. Enter the remote operation ID within 8 seconds and wait for 3 seconds. The unit will switch to the TAD/FAX mode.

When you press a key, press firmly.

To send a document, press

9 . When a fax tone is heard, start transmission.

61

Page 61
Image 61
Panasonic KX-FP85AL, KX-FP81AL manual Remote Operation KX-FP85 only, Operating from a remote location, Remote operation card