Panasonic KX-FP85AL, KX-FP81AL manual Receive mode

		Operations
Fax – receiving (cont.)
Problem	Cause & Remedy
The display shows the	● The incoming call is not a fax. Change the receive mode
following message but faxes	to the TEL or TAD/FAX (KX-FP85 only) mode (p. 40, 41).
are not received.
CONNECTING
The recording image is faint.	● The other party sent a faint document. Ask them to send a
	clearer copy of the document.
	● The thermal head is dirty. Clean it (p. 85).
The printing quality is poor.	● Some paper has instructions recommending which side to
	print on. Try turning the paper over.
	● Check the document of the other party.
A blank sheet is ejected.	● If a blank sheet is ejected after the received document is
	printed out, the receiving reduction rate is not
	programmed correctly. Program the proper rate in feature
	#36 (p. 70).
	● The other party placed the document in their fax machine
	the wrong way. Check with the other party.
Receive mode
Problem	Cause & Remedy
I cannot select the desired	● If you want to set the FAX ONLY, TEL/FAX or TAD/FAX
receive mode.	(KX-FP85 only) mode:
	— Select the desired mode using feature #77 (p. 73), and
	— Press AUTO ANSWER to turn on the arrow (▼) on
	the right of the display.
	Display:		▼
			ON

●If you want to set the TEL mode:

—	Press AUTO ANSWER to turn off the arrow (▼) on
	the right of the display.
		ON
The other party complains that ● The unit is not in AUTO ANSWER mode. Press
they cannot send a document.	AUTO ANSWER to turn on the arrow (▼) on the right of
the display.
		▼
		ON

79