Features Summary

Advanced features!

How to set menu options

1.Press MENU .

2.Rotate EASY DIAL until “ADVANCED MODE” is displayed.

Press SET and rotate EASY DIAL until the desired feature is displayed.

3.Press SET .

4.Rotate EASY DIAL until the desired setting is displayed.

5.Press SET .

6.Press MENU .

Note:

Step 4 may be slightly different depending on the feature.

See page 66 for more details.

Programming table

Code

 

 

Display & Feature

Settings

How the unit operates

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ON

“ON”:The unit will print the journal

 

 

 

 

AUTO JOURNAL

 

#22

 

 

 

report automatically after every 30

 

 

 

 

 

 

 

 

To print the journal report

 

 

OFF

new fax communications (p. 34).

 

 

 

 

 

 

automatically for fax communications

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

After transmission, the unit will turn

 

 

 

 

OVERSEAS MODE

 

 

 

 

 

 

 

off automatically.

 

 

 

 

 

 

 

ON

 

 

 

 

If you have difficulty sending an

 

 

 

 

This feature is not available for

 

 

 

 

 

#23

 

overseas fax, activate this feature

 

broadcast transmission.

 

 

before starting transmission. This

 

The calling charge may be higher.

 

 

 

 

 

 

 

feature makes sending documents

OFF

 

 

 

 

 

 

 

 

easier as the transmission speed is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

slowed down.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To send a document:

 

 

 

 

 

DELAYED SEND

 

 

 

 

 

 

 

 

 

1. Insert the document.

 

 

 

 

 

 

 

ON /

 

 

 

 

To send a fax automatically at a

 

 

 

 

2. Follow steps 1–3 above.

 

 

 

fax no. /

 

 

 

specified time.

3. Rotate

 

EASY DIAL

to select “ON”.

 

 

 

hh:mm

 

 

 

 

This allows you to take advantage

4. Press

 

SET .

 

 

 

 

 

 

 

 

 

 

of low-cost calling hours offered by

 

5. Enter the fax number.

 

#25

 

your telephone company.

 

6. Press

 

SET .

 

 

 

 

The setting can be reserved to

 

7. Enter the transmission start time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

take place up to 24 hours in

OFF

Press

 

 

to select “AM” or “PM”.

 

 

 

 

 

 

 

 

 

advance.

8. Press

 

SET .

 

 

 

 

 

 

 

 

9. Press

 

MENU .

 

 

 

 

 

 

 

 

To cancel after programming,

 

 

 

 

 

 

 

press

STOP then

SET .

 

 

 

For KX-FP85 only

ON

“ON”:The unit will print the Caller

 

#26

 

 

 

 

ID list automatically after every 30

 

 

 

AUTO CALL. LIST

 

 

 

 

 

 

 

 

 

 

 

 

OFF

new calls (p. 28).

 

 

 

 

To print Caller ID list automatically

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

See pages 46 and 47 for details.

 

 

 

 

SILENT FAX RING

 

 

 

 

 

 

 

 

 

 

 

 

 

#30

 

 

 

 

3, 4, 5, 6, 7,

 

 

 

 

 

 

To change the number of rings

 

 

 

 

 

 

8, 9

 

 

 

 

 

 

 

 

when the unit detects a voice call in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the TEL/FAX mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(The default setting is in bold type.)

(continued)

69

Page 69
Image 69
Panasonic KX-FP85AL, KX-FP81AL manual Advanced features