13. Cleaning
103
13.3 Cleaning the paper chute
Clean the paper chute inside the unit when a line or a
dirty pattern appears at the top or bottom of your
recording paper.
1Turn the power switch OFF.
2Push the left cover open lever (1) upward, then pull
open the left cover (2).
Note:
LDo not touch the rollers (4).
3Clean the paper chute (5) with a dry paper towel or
tissue.
Note:
LDo not touch the black belt (6), or rub it strongly.
4Close the left cover.
5Turn the power switch ON.
Caution:
LDuring or immediately after printing,
the fuser unit (3) gets hot. Wait until
the fuser unit cools down before
removing the jammed paper.
3
4
1
2
6
5