11. Help
84 For assistance, please visit http://www.panasonic.com/help
“Memory Overflow”LWhen printing a file, the document being stored exceeded the memory
capacity of the unit. Change the printer settings (page 29).
“Modem Error”LThere is something wrong with the unit’s modem. Contact our service
personnel.
“No Fax Reply”LThe other party’s fax machine is busy or has run out of recording paper. Try
again.
“Out of Paper Input Tray
#1”
LRecording paper is not installed or the paper input tray has run out of paper.
Install paper (page 16, 30).
LRecording paper was not fed into the unit properly. Reinstall the paper
(page 16, 30).
Note:
L“#1”: Standard input tray
L“#2”: Optional input tray
L“#1+#2”: Standard input tray and optional input tray
“Paper Jammed”LA recording paper jam occurred. See the other displayed message
instructions to remove the jammed paper (page 95).
“PC Fail or Busy.”LThe cable or the computer power cord is not connected correctly. Check the
connections (page 18, 26).
LThe software is not running on the computer. R estart the software and try
again.
“Please Wait”LThe unit is warming up. Wait for a while.
“Redial Time Out”LThe other party’s fax machine is busy or has run out of recording paper. Try
again.
“Remove Document”LThe document is jammed. Remove the jammed document (page 100).
LAttempted to send or copy a document longer than 600 mm (235/8") using
the automatic document feeder. Press {Stop} to remove the document.
Divide the document into two or more sheets and try again.
“RX Memory Full”LThe memory is full of received documents due to a lack of recording paper
or a recording paper jam. Install paper (page 16) or remove the jammed
paper (page 95).
LIf feature #442 (page 62) is set to “Always”,
– check the connection between the computer and the unit.
– check the computer is turned ON.
LIf feature #448 (page 62) is set to “On”,
– view, print or save the received fax documents (page 48, 49), and then
erase the unnecessary documents (page 49).
– turn the setting to “Off”. The fax documents stored in memory will be
printed automatically.
– set feature #449 (page 62) to “On”, and then print the received fax
documents (page 49).
“Scanner Position Error”LThere is something wrong with the scanner position. Turn the power switch
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
“Self Calibration”LThe unit is changing the color calibration. Wait for a while.
“Transmit Error”LA transmission error occurred. Try again.
“Toner Cartridge Not
Installed”
LThe toner cartridge is not installed. Install it (page 11).
“Tray #2 Left Cover
Open”
LThe left cover of the optional input tray is open. Close it.
Display Cause & Solution