9. Programmable Features
64
9.4 Copy features
Feature/Code Selection
Setting the paper input tray to
use for copy
{#}{4}{6}{0}
This feature will be displayed only when the optional input tray is installed.
{1} #1 (default): Standard input tray
{2} #2: Optional input tray
{3} #1+#2
Note:
LIf you select #1+#2, make sure the same paper size is selected for the
following:
Standard input tray (feature #380 on page 58)
Optional input tray (feature #382 on page 58)
If either is changed, #1 will be selected automatically.
Changing the default copy
resolution
{#}{4}{6}{1}
To change the default resolution setting for copying.
{1} Text/Photo (default): For documents containing both text and
photographs.
{2} Text: For documents containing only text.
{3} Photo: For documents containing photographs, shaded drawings, etc.
Holding the previous page
layout setting
{#}{4}{6}{7}
{0} Disabled (default): Deactivates this feature.
{1} Enabled: The unit will hold the previous setting.
Holding the previous zoom
setting
{#}{4}{6}{8}
{0} Disabled (default): Deactivates this feature.
{1} Enabled: The unit will hold the previous setting.
Holding the previous collate
setting
{#}{4}{6}{9}
{0} Disabled (default): Deactivates this feature.
{1} Enabled: The unit will hold the previous setting.
Holding the previous duplex
setting
{#}{4}{7}{0}
This feature will be displayed only when the automatic duplex unit is installed.
{0} Disabled (default): Deactivates this feature.
{1} Enabled: The unit will hold the previous setting.