1. Introduction and Installation
17
For assistance, please visit http://www.panasonic.com/help
paper is under the paper limit mark (7). The
paper should not be loaded over the tab (8).
5Insert the standard input tray to the unit, lifting the
front part of the tray. Then push it completely into the
unit.
Note:
LIf the paper is not loaded correctly, re-adjust the
paper guides, or the paper may jam.
LIf the standard input tray does not close, the plate in
the standard input tray may be lifted. Push the paper
and make sure that the paper is laid flat in the
standard input tray.
Caution for the standard input tray
LDo not drop the standard input tray.
LHold the standard input tray with both hands
when removing or installing. The standard input
tray weighs approximately 2.9kg (6.4 lb) when
the recording paper is fully loaded.
Do not touch the plate (1) on the left side of the
standard input tray.
768
6
Approx. 2.9 kg (6.4 lb)
1