10. Useful Information
76
10.4 Changing the color calibration
If color printing is too dark or too light, change the color
calibration.
1Select the desired color to change the calibration.
LTo change the color density for cyan, magenta,
yellow and black, press {Menu}. i
{#}{4}{8}{5}
LTo change the color calibration for cyan, press
{Menu}. i {#}{4}{8}{6}
LTo change the color calibration for magenta,
press {Menu}. i {#}{4}{8}{7}
LTo change the color calibration for yellow, press
{Menu}. i {#}{4}{8}{8}
LTo change the color calibration for black, press
{Menu}. i {#}{4}{8}{9}
2Select the desired color calibration.
{0} -5
{1} -4
{2} -3
{3} -2
{4} -1
{5} 0 (default)
{6} 1
{7} 2
{8} 3
{9} 4
{*} 5
3{Set}
4Press {Menu} to exit.
Printing a color test
You can print the color test to check the color density for
each color (page 104).
Option
10.5 Optional handset unit
You can add an optional handset unit. See page 7 for
accessory information.
Important:
LBefore installing or removing the optional
handset unit, be sure to turn the power switch
OFF. For more details about the installation,
please refer to the installation guide for the
optional handset unit.
1Connect the handset cord (1) to the handset cradle.
2Connect the handset connector (2).
LRemove the cover (3) from the handset unit
connection jack if attached.
1
3
2