11. Help
83
For assistance, please visit http://www.panasonic.com/help
“Check Pick Up Input
Tray #1”
LRecording paper was not fed into the unit properly. Re-insert the recording
paper (page 99).
Note:
L“#1”: Standard input tray
L“#2”: Optional input tray
“Color Drum Life Low”
“Monochrome Drum Life
Low”
LThe drum cartridge life is near its end. Replace the drum cartridge as soon
as possible.
“Color Drum Replace”
“Monochrome Drum
Replace”
LThe drum cartridge life is finished. Replace the drum cartridge immediately.
Note:
LThe continuous use of an old drum cartridge may cause malfunction. To
prevent this, when the drum life is finished, the unit will stop printing after a
while, and printing will not be possible until a new drum cartridge is
installed.
“Cool Down Fuser”LThe unit is cooling down the fuser unit . Wait for a while.
“Directory Full”LThere is no space to store new items in navigator directory. Erase
unnecessary items (page 43).
“Drum Not Installed”LThe color drum cartridge or the monochrome drum cartridge is not installed.
Install it (page 11).
“E-Mail Size Over”LWhen performing scan to e-mail server, the total file size of scanned data
exceeded the file size limitation. Divide the document into sections.
“Fax in Memory”LThe unit has a document in memory. See the other displayed message
instructions to print out the document. For fax memory capacity, see page
105.
LIf feature #442 (page 62) is set to “Always”,
– check the connection between the computer and the unit.
– check the computer is turned ON.
LIf feature #448 (page 62) is set to “On”,
– view, print or save the received fax documents (page 48, 49), and then
erase the unnecessary documents (page 49).
– turn the setting to “Off”. The fax documents stored in memory will be
printed automatically.
– set feature #449 (page 62) to “On”, and then print the received fax
documents (page 49).
“File Size Over”LWhen performing scan to FTP server, the total file size of scanned data
exceeded the file size limitation. Divide the document into sections.
“Front or Left Cover
Open”
LThe front or left cover is open. Close it.
“Keep Copying”LCopying has stopped due to some existing problem (example: a lack of
recording paper or a recording paper jam). See the other displayed
message instructions to continue copying.
“Low Temperature”LThe inside of the unit is extremely cold and cannot be operated. Use the unit
in a warmer area.
“Memory Full”LWhen performing memory transmission, the document being stored
exceeded the memory capacity of the unit. Send the entire document
manually.
LWhen making a copy, the document being stored exceeded the memory
capacity of the unit. Press {Stop} to clear the message. Divide the
document into sections.
Display Cause & Solution