Panasonic KX-TG2386 operating instructions Programmable Settings LCD Contrast Handset

Programmable Settings

LCD Contrast Handset

There are 6 levels of LCD contrast. The factory preset is “level 3”.

1Press [MENU].

2	Scroll to “Initial setting” by pressing [d]
		Initial setting
	or [B], then press the soft key (Select).
		KBack dB SelectL
3	Scroll to “LCD contrast” by pressing [d] or
		LCD contrast
	[B], then press the soft key (Select).
		KBack dB SelectL
4	Select the desired contrast by pressing [d] or	Ex. Level 3
	[B].	LCD contrast
	• The contrast will change.	Low	High
		KBack dB	SaveL

5Press the soft key (Save), then press [OFF].

Talking Keypad Handset Base Unit

Talking Keypad is a feature that announces phone numbers that you dial, allowing you to confirm dialed numbers audibly before making calls. You can turn this feature on or off for the handset and base unit separately. The factory preset is ON. While handset Talking Keypad is turned on, the handset announces each dialing button you press when pre-dialing (p. 30).

While base unit Talking Keypad is turned on, the base unit announces each dialing button you press, and announces “Redial” when [REDIAL] is pressed (p. 32, 33).

If you dial a phone number quickly, the handset and base unit may not announce the dialed phone number correctly. For best results, dial each digit one at a time, and wait for the unit to announce each digit before dialing the next digit.

Handset Talking Keypad feature Handset

1Press [MENU].

2	Scroll to “Accessibility” by pressing [d] or
		Accessibility
	[B], then press the soft key (Select).
		KBack dB SelectL
3	Scroll to “HS Announce” by pressing [d] or
		HS Announce
	[B], then press the soft key (Select).
		KBack dB SelectL

20