Panasonic KX-TG2386 operating instructions Installation, Connections

Installation

Connections

Fasten the cords.	Single-Line Telephone Jack (RJ11C)
Hooks
	Telephone	* Noise Filter
	Line Cord
		(For DSL users)
		Power Outlet
		(AC 120 V, 60 Hz)
		AC Adaptor

Preparation

•USE ONLY WITH Panasonic AC ADAPTOR PQLV1 (Order No. PQLV1Z).

•The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

•The AC adaptor should be connected to a vertically oriented or floor–mounted AC outlet. Do not connect the AC adaptor to a ceiling–mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

•If your unit is connected to a PBX which does not support Caller ID, you cannot access Caller ID services.

•The unit will not work during a power failure. We recommend connecting a standard telephone to the same telephone line or to the same telephone jack using the Panasonic KX-J66 T-adaptor.

*If the unit is connected to a telephone line with DSL service, you may hear noise from the receiver or speaker during conversations or the unit may not display caller’s name and/or phone number properly. We recommend connecting a noise filter (contact your DSL service provider) to the telephone line between the base unit and the telephone line jack.

For assistance, please call: 1-800-211-PANA(7262)

9