Panasonic KX-TG2386 Programmable Settings, Ringer Tone, Base unit ringer volume Base Unit

Programmable Settings

Base unit ringer volume Base Unit

Make sure the base unit is not being used.

To set the ringer volume to high (preset), medium, or low, press VOLUME [<] or [>].

•To increase volume, press VOLUME [>]. To decrease volume, press VOLUME [<].

•To stop ringing, press [STOP].

To turn the ringer off, press and hold VOLUME [<] until 2 beeps sound.

• “O” is displayed.

To turn the ringer on, press VOLUME [<] or [>].

•The base unit will ring at low level.

•You can adjust the ringer volume while an outside call is ringing. Press VOLUME [<] or [>] while the base unit is ringing.

To turn the ringer off, press and hold VOLUME [<] for 2 beeps sound. “O” is displayed.

Ringer Tone

You can select the handset and base unit ringers to use one of 7 ringer patterns for outside calls. “Tone 1” to “Tone 3” are bell ringer patterns. “Melody 1” to “Melody 4” are melody patterns. The factory preset is “Tone 1”.

•You cannot change the ringer tone for intercom calls.

•If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your telephone company with 2 or 3 consecutive rings, select a bell ringer pattern (Tone 1 to 3). If you select a melody pattern, you will not be able to distinguish lines by their ringers.

•If you select one of the melody ringer patterns, the ringer will continue to sound for several seconds if:

—the caller hangs up before you answer the call, or

—another person answers the call using another phone connected on the same line.

Handset ringer tone Handset

1Press [MENU].

2	Scroll to “Ringer setting” by pressing [d]
		Ringer setting
	or [B], then press the soft key (Select).
		KBack dB SelectL
3	Scroll to “Ringer tone” by pressing [d] or
		Ringer tone
	[B], then press the soft key (Select).
		KBack dB SelectL

18