Panasonic KX-TG2386 operating instructions General, But Recharge battery is

Troubleshooting

General

Problem Cause & Remedy

The unit does not work.

•Check the settings (p. 9–11).

•Check whether the dialing mode setting is correct (p. 15).

•Fully charge the battery (p. 10).

•Clean the charge contacts and charge again (p. 11).

•Check battery installation (p. 10).

•Unplug the base unit’s AC adaptor to reset it. Plug in, and try again.

•Re-install the battery (p. 10) and fully charge it.

“Recharge battery” is displayed, “7” flashes, or the handset beeps intermittently.

• Fully charge the battery (p. 10).

“Charge for 6h” and “8”	• The battery has been discharged. Fully
are displayed and the handset	charge the battery (p. 10).
does not work.	• Check battery installation (p. 10).
You charged the battery fully,	• Clean the charge contacts and charge again
but “Recharge battery” is	(p. 11).
still displayed and/or “7”	• The battery may need to be replaced. If you
continues to flash, or “Charge	install a new battery, fully charge it (p. 10).
for 6h” and “8” are
displayed.
The CHARGE indicator does	• This is normal.
not go out after the battery has
been charged.
If you cannot solve your	• Visit our website:
problem	http://www.panasonic.com/support
	• Contact us via the web at:
	http://www.panasonic.com/contactinfo
	• Call our customer call center at:
	1-800-211-PANA(7262)

82