Panasonic KX-TG2386 operating instructions Select the desired ringer tone by pressing d or B

Programmable Settings

4Select the desired ringer tone by pressing [d] or [B].

•The handset will ring and the ringer tone will change. If the handset ringer volume has been turned off, the handset will not ring (p. 17).

•You can also select the ringer tone by pressing [1] to [7].

Ringer tone 1:Tone 1

KBack dB SaveL

Preparation

5Press the soft key (Save), then press [OFF].

Base unit ringer tone

(use either the handset or the base unit) Base Unit

Make sure the base unit is not being used.

Press VOLUME [<] or [>], then select the desired ringer tone by pressing

[1]to [7].

[1] to [3] : Bell ringer patterns [4] to [7] : Melody patterns

•After pressing VOLUME [<] or [>], the base unit will ring using the current ringer tone.

•The base unit will ring and the ringer tone will change.

•To stop ringing, press [STOP].

Setting the base unit ringer tone by using the Handset

1Press [MENU].

2Scroll to “Initial setting” by pressing [d] or [B], then press the soft key (Select).

3Scroll to “Set base unit” by pressing [d] or [B], then press the soft key (Select).

4Press the soft key (Select) at “Ringer tone”.

5Select the desired ringer tone by pressing [d] or [B].

•The base unit will ring and the ringer tone will change. If the base unit ringer volume has been turned off, the base unit will not ring (p. 18).

•You can also select the ringer tone by pressing [1] to [7].

6Press the soft key (Save), then press [OFF].

For assistance, please call: 1-800-211-PANA(7262)

19