Panasonic KX-TG2386 Erasing Messages, Erasing a specific message, Erasing all messages

Erasing Messages

The unit will announce the remaining recording time after playback if it is less than 3 minutes.

New messages cannot be recorded when:

—“Memory full” is heard.

—“ FULL ” flashes on the base unit.

—the ANSWER ON indicator flashes rapidly (when the Answering System is on).

Erase unnecessary messages. We recommend you erase unnecessary messages after each playback.

Erasing a specific message

Base Unit

Press [ERASE] while the message you want to erase is being played.

•The unit beeps, then plays back the next message.

•To exit playback mode, press [STOP] twice.

Handset

Press [*] [4] while the message you want to erase is being played.

•The unit beeps, then plays back the next message.

•To exit remote operation mode, press [OFF].

Erasing all messages

[STOP]

[ERASE]

ANSWER ON Indicator

All recorded messages, except the greeting message, can be erased at one time.

Base Unit

1Press [ERASE] while the base unit is not being used.

•“To erase all messages, press ERASE again” is heard.

2Within 10 seconds, press [ERASE] again.

•The unit beeps, then announces “No messages”.

•The base unit display shows “0”.

Handset

1Press [MENU].

2Press the soft key (Select) at “Message play”.

3Press [*] [5].

•The unit beeps, then announces “No messages”.

•To end remote operation, press [OFF].

•Information in the Caller List will not be erased. To erase caller information, see page 43.

66