Panasonic KX-TG2386 operating instructions Locator/Intercom, Answering Intercom Calls

Locator/Intercom

From Base Unit

Using this feature, you can also locate a misplaced handset.

1Press [LOCATOR/INTERCOM].

•The SP-PHONE indicator lights.

•The handset will ring for 5 minutes.

•To stop paging, press [SP-PHONE] or [LOCATOR/INTERCOM].

2When the paged party answers, talk into the MIC.

3To disconnect the intercom, press [SP-PHONE]or [LOCATOR/ INTERCOM].

•The indicator light goes out.

During an intercom call:

•If you have difficulty hearing while using the handset speakerphone and base unit speaker, decrease the speaker volume by pressing VOLUME [<] on the base unit or [d] on the handset.

•If an incoming call is being received, you will hear two tones (incoming call tone, page 59) and “ LINE IN USE ” will flash rapidly on the base unit.

To answer the call;

—if using the handset, press [OFF], then [C] or [s].

—if using the base unit, press [SP-PHONE] twice.

Telephone System

Answering Intercom Calls

Handset

When a handset is paged, it rings and the Ringer/Message Alert indicator flashes rapidly.

1Press [C], [s] or [HOLD/INTERCOM].

•You can also answer a call by pressing any button except [d], [B] or [OFF].

Call from Base

2To disconnect the intercom, press [OFF].

Base Unit

When the base unit is being paged, it rings.

1Press [SP-PHONE] or [LOCATOR/INTERCOM].

2To disconnect the intercom, press [SP-PHONE]or [LOCATOR/ INTERCOM].

•When the ringer volume is turned off (p. 17, 18), the handset and the base unit will ring at the low level for intercom calls.

•You cannot change the ringer tone for intercom calls.

For assistance, please call: 1-800-211-PANA(7262)

53