118
ENGLISH
Specifications

Model No. PT-DW100E

Power supply 220 V – 240 V, 50 Hz/60 Hz
Power consumption 1 500 W (about 15 W in standby)
Amps 9.5 A
DLP® Chip
Panel size 0.85 inch (aspect ratio 16:9)
Display system Three-unit DLP® chip, DLP® type
Number of pixels 3 × 1 049 088 pixels (1 366 × 768 dots)
Lens
(Powered zoom/
Powered focus control)
Option
Projection lamp 4 bulbs × 300 W UHM lamp
Optical output*1 10 000 lm (ANSI)
Applicable
scanning
frequency
For video signal
(S-video included) Horizontally 15.75 kHz/15.63 kHz, vertically 60 Hz/50 Hz
For RGB signal
Horizontally 15 kHz–100 kHz, vertically 24 Hz–120 Hz,
Panasonic Intelligent Auto Scanning (PIAS) system
Dot clock frequency 20 MHz–162 MHz
For DVI-D signal
480p, 576p, 720/60p, 720/59.94p,
720/50p, 1 080/60p, 1 080/59.94p,
1 080/50p, 1 080/60i, 1 080/59.94i,
1 080/50i, 1 080/24sF, 1 080/23.98sF,
1 080/30p, 1 080/29.97p, 1 080/25p,
1 080/24p, 1 080/23.98p
Displayable resolution : VGA-WUXGA
(non-interlace)
Dot clock frequency : 25 MHz-162 MHz
The WUXGA signals support only VESA
CVT-RB (Reduced Blanking) signals.
For YPBPR signal
[480i] horizontally 15.73 kHz, vertically 59.94 Hz
[480p] horizontally 31.5 kHz, vertically 59.94 Hz
[576i] horizontally 15.63 kHz, vertically 50 Hz
[576p] horizontally 31.25 kHz, vertically 50 Hz
[720/50p] horizontally 37.5 kHz, vertically 50 Hz
[720/60p] horizontally 45 kHz, vertically 60 Hz
[1 035/60i] horizontally 33.75 kHz, vertically 60 Hz
[1 080/60i] horizontally 33.75 kHz, vertically 60 Hz
[1 080/50i] horizontally 28.13 kHz, vertically 50 Hz
[1 080/24p] horizontally 27 kHz, vertically 24 Hz
[1 080/30p] horizontally 33.75 kHz, vertically 30 Hz
[1 080/25p] horizontally 28.13 kHz, vertically 25 Hz
[1 080/24sF] horizontally 27 kHz, vertically 48 Hz
[1 080/60p] horizontally 67.5 kHz, vertically 60 Hz
[1 080/50p] horizontally 56.25 kHz, vertically 50 Hz
HD/SYNC, VD terminals are not compliant with 3 value composite SYNC.
Colour system 7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60)
Screen size 70 inch–600 inch*2
Screen aspect ratio 16:9
Projection scheme Menu-selectable from front/rear/ceiling mount, and floor mounting
Contrast ratio
(full white/full black) 5 000:1 (when “DYNAMIC IRIS” has been set to “3”)
Interface
ports
Input module
connection slot One system
RGB1 input
terminal
1 set, BNC × 5
[For YPBPR input]
Y: 1.0 V[p-p] synchronization signal included, PBPR: 0.7 V [p-p] 75 Ω
[For RGB input]
0.7 V[p-p] 75 Ω For G-SYNC: 1.0 V [p-p] 75 Ω
HD/SYNC: 75 Ω, 1.4–5 Vp-p, positive/negative polarity automatically adjusted
VD: 75 Ω, 1.4–5 Vp-p, positive/negative polarity automatically adjusted