Panasonic TQBJ 0268-5 Network control, Network status, Press to select Network

How to use network function (continued)

•DHCP (DHCP client function) :

Set the DHCP item to ON when to acquire an IP address automatically using the DHCP server. Set to OFF if DHCP server is not used. Enter the IP address if DHCP server is not used.

•IP ADDRESS (Display of IP address and setting) :

Enter the IP address if DHCP server is not used.

•SUBNET MASK (Displaying and setting the subnet mask) :

If not using a DHCP server, enter the subnet mask.

•GATEWAY (Display of gateway address and setting) :

Enter the gateway address if DHCP server is not used.

•STORE:

Save the current network settings.

4.Press ▲▼ to select “STORE”, and then press ENTER.

Note

•Before using the DHCP server, make sure the DHCP server is already functioning.

•For details of IP address, subnet mask, and gateway, ask the network administrator.

Network control

This sets the network control method.

1. Press ▲▼ to select “NETWORK

CONTROL”.

NETWORK SETUP

NETWORK CONTROL

NETWORK STATUS

2.Press ENTER.

•The “NETWORK CONTROL” screen will be displayed.

NETWORK CONTROL

WEB CONTROL	ON
WEB PORT	80
PJLink CONTROL	OFF
COMMAND CONTROL	OFF
COMMAND PORT	1024
STORE

3.Press ▲▼ to select items, and press ◄► to change the setting.

•WEB CONTROL:

Set this to ON when you want to prohibit basic control and advanced control of the Web browser. (pp. 91-102)

•WEB PORT:

Set the port number to use.

•PJLink CONTROL:

Set this to ON when you want to perform control with the PJLink protocol. (p. 103)

•COMMAND CONTROL:

Set to ON to control using the control command via the serial terminal. (pp.104-107) If settings have been made without an administrator password of the Web browser control, add 2-byte “00” instead of STX, and a line-feed code (0Dh) instead of ETX. If settings have been made with an administrator password of the Web browser control, add a 32-byte hash value and “00” instead of STX and a line-feed code (0Dh) instead of ETX. The hash value is created by MD5 combining “admin1:”, password, “:” and random numbers. The random numbers are 8-byte values sent from the projector when connecting.

•COMMAND PORT:

Set the port number used for the command control.

•STORE:

Save the current network control settings.

Network status

This displays the network status of the main unit.

1. Press ▲▼ to select “NETWORK STATUS”.

NETWORK SETUP

NETWORK CONTROL

NETWORK STATUS

2.Press ENTER.

•The “NETWORK STATUS” screen will be displayed.

NETWORK STATUS

DHCP		OFF
IP ADDRESS	192.	168.	0.	8
SUBNET MASK	255.	255.	255.	0
GATEWAY	192.	168.	0.	1
DNS1	0.	0.	0.	200
DNS2	0.	0.	0.	0
MAC ADDRESS	00:0B:97:41:03:05

Returning the network function

setting back to the factory setting

Network function settings such as the IP address, password, and e-mail settings can be return to their factory settings with the initialize menu of the projector setup. (p. 82)

90 – ENGLISH