Configure the settings relating to the mail notification [Mail]
Select the [Mail] tab on the "Server" page. (☞ Page 60)
The settings of alarm mail notice, the settings of error report mail (☞ Operating Instructions (PDF)) and the settings to use the mail functions can be configured on this tab.
[SMTP server address]
Enter an IP address or a name of the SMTP server to send
[SMTP port number]
Enter the port number of the SMTP server. 1 - 65535
Default: 25
[POP server address]
Enter an IP address or name of the POP server to be used for POP before SMTP authentication.
The name of the POP server is available only when selecting "Manual" or "Auto" for the "Network" page - the [DNS] tab. Enter up to 255 alphanumeric characters including hyphens
[Type]
Select the authentication method to send
None /POP before SMTP/SMTP Default: None
[Type - User name]
Enter the user name to be required for the authentication. Enter up to 32 alphanumeric characters excluding "&" listed in the description of "Available characters". (☞ Page 96)
[Type - Password]
Enter the password to be required together with the user name for the authentication. Enter up to 32 alphanumeric characters excluding "&" listed in the description of "Available characters". An entered character for the pass- word will be displayed as "∗" or "·". Enter up to 32 alphanu- meric characters excluding "&" listed in the description of "Available characters" (☞ page 96). An entered character for the password will be displayed as "∗" or "·".
[Sender's address]
Enter the mail address of a sender. Entered mail addresses will be displayed in the "From" (sender) line. Enter up to 255 alphanumeric characters including hyphens
■Destination address
[Address 1]
Enter the mail addresses of the recipients of the alarm mail (☞ Operating Instructions (PDF)) and the warning mail (☞ Operating Instructions (PDF)). Enter up to 255 alphanumeric characters including hyphens
Check the desired mail type (warning/alarm) to be sent.
Up to 4 destinations can be registered. To add destinations, select the [Setup] of "Other destinations".
97