Symptom, Blur images are displayed, Check item/Remedy

Symptom

Cannot record.

Cannot record the setup menu of the matrix switcher.

The images or embedded characters displayed on the monitor look blurry.

148

	Check item/Remedy	Ref. Page


	• Is the lens of the camera clean?	–
	Check if the lens is not dusty or dirty.	–
	Check if the lens is not dusty or dirty.


	• Is the user level of the current login user allowed to display the
	setup menu?	108
	Check the user level of the current login user.


	• Is Monitor 2 being operated?	57
	The setup menu will not be displayed on Monitor 1.	57
	The setup menu will not be displayed on Monitor 1.


	• Is there available space on the hard disk drive?	119
	Check the available disk space.	119
	Check the available disk space.


	• Is "On" set for recording?	67
	Check the settings.	67
	Check the settings.


	• Are the schedules set correctly?	79
	Check the settings.	79
	Check the settings.

•When the setup menu is displayed using non-interlace signal, the setup menu sometimes cannot be recorded/displayed.

	Since the setup menu of the matrix switcher is build using non-	–
	interlace signal, it may be possible that the recorder cannot
	recorder/display it.


	• Depending on the photographic subject or HDMI monitor that
	is connected, images or embedded characters may look blur-	–
	ry. That is not a trouble.


	• Have images certainly been recorded?	119
	Check if there are recorded images on the recorder.	119
	Check if there are recorded images on the recorder.


	• Is the user level of the current login user allowed to play
	recorded images?	108
	Check the user level of the current login user.


	• Is the user level of the current login user allowed to display
	images from the camera?	108
	Check the user level of the current login user.

•Is the connection made correctly?

The camera channels of which the cameras can be controlled

	in coaxial communication are cameras connected to the video	29
	input connector 1-8 (ch). (HD616K)
	Check the camera channel to be controlled.


	• Is it the combination camera to be controlled?	29
	Check the camera type to be controlled.	29
	Check the camera type to be controlled.


	• Is the camera control set correctly?	92
	Check the settings.	92
	Check the settings.

Panasonic WJ-HD716K Symptom, Blur images are displayed, Cannot open the setup menu Cannot record