Manuals / Panasonic / Home Audio / CD Player

Panasonic WJ-HD716K manual Maintenance port, IP address, Subnet mask, Default gateway, Line speed

Models: WJ-HD616K WJ-HD716K

1 156

Download 156 pages 35.47 Kb

Page 100

[IP address]

[IP address]

When "Off" is selected for "DHCP", enter an IP address. Enter 4 units from the decimal numbers (0-255). Default: 192.168.0.250

[Subnet mask]

Enter a subnet mask according to the network environment when "Off" is selected for "DHCP". Enter 4 units from the decimal numbers (0-255).

Default: 255.255.255.0

[Default gateway]

Enter the IP address of the gateway according to the net- work environment when "Off" is selected for "DHCP". Enter 4 units from the decimal numbers (0-255).

Default: 192.168.0.1

[Line speed]

Specify the line speed for data transmission. Auto: Line speed will be applied automatically. 10M-Half:10 Mbps half-duplex

10M-Full:10 Mbps full-duplex

100M-Half:100 Mbps half-duplex

100M-Full: 100 Mbps full-duplexDefault: Auto

■Maintenance port

The setting for the maintenance port behind the front cover of the recorder is configured.

This setting is required to maintain and support the recorder from a PC connected via a network using the maintenance port.

[IP address]

When "Off" is selected for "DHCP", enter an IP address. Enter 4 units from the decimal numbers (0-255). Default: 192.168.2.250

[Subnet mask]

Enter a subnet mask according to the network environment when "Off" is selected for "DHCP". Enter 4 units from the decimal numbers (0-255).

Default: 255.255.255.0

Important:

•The settings of "Network Port" and "Maintenance Port" should be on a different subnet.

[Line speed]

Displays the line speed for data transmission. It is impossible to change the setting value.

100

Image 100

Panasonic WJ-HD716K, WJ-HD616K manual Maintenance port, IP address, Subnet mask, Default gateway, Line speed

Contents

Installation Guide Digital Disk RecorderThis apparatus must be earthed Disclaimer of warranty Limitation of liabilityImportant safety instructions Contents Configure the basic settings relating to user Features PrefaceEasy operation using a PC mouse Easy hard disk drive replacementSystem configuration SDHC/SD memory card slotAbout the user manuals System requirements for a PCCopyright Trademarks and registered trademarksAbbreviations Network security Precautions Power sourceAmbient operating temperature POWER switchCleaning Indication labelAVC patent portfolio license GPL/LGPLPrecautions for Installation Avoid the following locations for installationPower source How to mount the power cordFor BNC cable connection GroundingMajor operating controls and their functions Front viewuMaintenance port iHDD indicator HDD1 to HDD4oMonitor operation button 0Playback control function buttonInsert an optional SDHC/SD memory card Insert a DVD disc commercially availableStep StepStep StepClose the DVD drive cover u HDD indicator yRAID switch RAIDDefault: S Behind the front coverHow to detach the front cover How to attach the front coverStep Stept y u Rear view7 !8!1 o How to use the power cord plug brace 4 Monitor output connector BNC MONITOR OUT 1,5 Cascade input connector BNC/HDMI CASCADE IN 6 Monitor output connector HDMI MONITOR OUT HD 1,User/Host management When operating the recorder directlyItem DescriptionWhen operating from a PC via a network User authenticationHost authentication settingBasic operation Operations using the buttons onOperations using a mouse the front coverOperations flow cInstallation of the hard disk driveszRack mounting Page xConnections PageRack mounting StepStep StepConnections Mode switch setting defaultMode switch setting default Connection of camerasWhen connecting a monitor using a BNC cable Connection of monitorsWhen connecting a monitor using a HDMI cable RecorderConnect a PC and the recorder directly Connection of a PCAdd the recorder to the existing network Connection of an extension unit Fix the connection cable Fix the connection cableConnection of a VCR Mode switch Connection of a PS·Data compatible deviceNo.7: ON No.8: OFF Controller Termination: On Unit address:No.7: OFF When connecting a system device to the recorderNo.8 OFF Cascading connection using BNC cables Cascading connection of multiple recordersCascading connection using HDMI cables Connection of PS·Data compatible devices 1 2 3 4 5 Page Connection of RS485 cameras 1-on-1connectionDaisy chain connection Connect multiple RS485 cameras to the RS485 portAbout the connectors SignalPin array Pin NoSignal ground Emergency recording input External switch ALARM/CONTROLSignal ground External recording mode changeover External switch ALARM/CONTROLConnection for the auto time adjustment function Connection for the auto time adjustment functionTerminal of the other device Terminal of the other deviceConnection of the control output Signal Pin arrayPin No OperationAlarm connection Active time TerminalRemarks Mode switch Inside block diagramRS485 port 1 2 3 4 5 6 7Install/remove HDD units Install the HDD unitsStep StepInstall a hard disk drive into an HDD canister Remove the HDD unitStep StepStep StepStep StepStartup During recordingCurrently recorded images are being played StepQuick button StepStep Setup menu qQuick button wBasic buttoneEvent button rSchedule button1 Maintenance button 33Setup pageDisplay the setup menu Display the setup menuStep Select the desired setup menu Step Select the desired setup menuStep Select the desired tab Step Select the desired tabSelection of setting item Change of settings or setting valuesChange of settings or setting values StepStep StepREC setup Default: English Time & dateResolution ScheduleSchedule setting example RateipsDisplay button OK buttonDefault: English Go to last before Default 30s BuzzerDefault 2s LanguageDefault MMM/DD/YY Time display format Auto adjustment timeDefault: Off Activation time Default: OutSummer time daylight saving table Default: On Default: On Embedded Rec Time & dateDefault: On RecordingConfigure the settings relating to audio Audio Default: OffAudio1 - Audio4 Rcv. Int. for PCResolution Default: 10 s• When Field is selected for Resolution Default: FQConfigure the settings relating to event Event Alarm outputDefault 2s Default: 2sPreset Terminal setupDefault: N.C Operation modePreset Operation modeRec. cam Output terminalPreset Select the Video loss tab on the Event page. PageOperation mode Rec. camPreset Operation ModeRec. cam Output terminalSearch Area buttonStep Settings for the video motion detection functionStep Step Set the end point of the detection areaStep StepFlowchart on how to create a schedule Create a program ProgramCreate a program Create a time tableResolution Default: FQ Rateips•When Field is selected for Resolution Manual rec./Schedule rec./Event recNew time table setup Alarm messageFTP image transmission by alarm StepPanasonic alarm protocol MailBack button DateDefault: L-Upper Default: R-UpperDefault: White Multi screen setup Time & date display positionTo configure the settings, do the following StepStep Select the Setup button of Camera setupStep Alarm display Login screenDefault Secret view Time & date displayConfiguring the sequence display settings Preset positionDwell time Back buttonConfiguring the sequence display settings Default: Low Camera title displayLogin screen Status displayDisplay Configure the camera title Camera titleEmbedded Rec Default: 1-screen 1-screenlive sequence •Preset positionThe method of sequence Cam4-screenlive sequence •Cam•Dwell time •Back buttonDefault S Type CompAlarm data Camera number setupUnit address system Unit address controllerDefault Panasonic Baud rate Default: ParityDefault: ProtocolTime adjustment NTP server addressImage transmission by alarm PasswordFTP server address User nameDefault: POP server address Type - PasswordDestination address SMTP server addressOther destinations Default Network PortHTTP port number FTP port numberMaintenance port Default gateway100M-Full: 100 Mbps full-duplex Default: Auto IP addressConfigure the settings relating to DNS DNS Default: Domain namePassword Access intervalDefault: 1h Host name DDNSConfigure the settings relating to SNMP SNMP CommunitySystem name LocationDefault: Retry Destination addressPort number to PC Address1 to Address8Live video resolution Live video raterec resolutionDefault: 7.5ips Live video qualityrec resolution Default: UnlimitedUser authentication Host authenticationAuto login user Default: ADMIN Auto loginAdministrator name New passwordRetype new password Access priorityPassword Access priorityDefault screen Registers user informationChange or delete the user information StepStep StepAccess priority Default screenRegisters host information Host IP addressChange or delete the host information StepStep StepSetting of operation level User level Functions that can be restrictedFunction DescriptionAbout the i-VMDfunction of SD5 cameras Setting the detection areas and sensitivity StepStep StepStep Set the start point of the detection areaStep StepSetting the scene change Setting the detection modeIndicator StepSetting the detection depth StepStep StepSetup data SelectUpload button Download buttonPage Recording information Main button/Ext.1 - Ext.3 buttons•Capacity •Remain capacityPre-recordingarea information Default: Continue Default: Off Event recording areaDefault: Off •HDD manual delete Disk end modeManage the settings Settings management Reset to the defaultSave settings on the SD Load settings on the SDCheck the error log Check the access logAbout access log View Log Information LogsCheck the event log Check the network error logAbout event logs Manage hard disk drives About hard disk drivesAbout the RAID 5/RAID 6 mode Determine the operation modeAbout the disk configuration page How to display the disk configuration pageStep StepCheck the hard disk drive information Format the hard disk drives Format StepStep StepSelect the OK button StepStep Format the pre-eventrecording area StepStep StepStep StepStep Select the Format buttonReplacement/addition of hard disk drives Prepare for removing the hard disk drives. PageHDD shutdown process Remove the hard disk drives from the recorderStep Select the hard disk drive to be shut down, and select the OK buttonInstall an HDD unit in the recorder The hard disk drive is installed as a recordThe hard disk drive is installed as a playback The hard disk drive is installed as a recordableWhen a formatted hard disk drive is installed When an unformatted hard disk drive is installedAuto recognition of hard disk drives Add a hard disk drive to the system StepStep StepOperation of the extension unit Add an extension unit to the systemStep StepShutdown process of the extension unit StepStep StepAbout the error log ContentError log connector atContent Error logconnector at Network LogContent Error logconnector at Network LogContent Error logconnector at Network LogContent Error logconnector at Network LogIn the process of the recovery At a hard disk drive error failureSource 6 mode StepStep StepTroubleshooting SymptomPower is not turned on The error indicator lights orangeSymptom Cannot open the setup menu Cannot recordBlur images are displayed Cannot play recorded imag- esSymptom Alarm operations are not activatedCannot control the camera The VIDEO LOSS indica- tion is displayedSymptom The HDD status indicator does not lightThe HDD indicator is being lit red/blinking red The hard disk drive is not recognizedSymptom Cannot access from the web browserCannot connect via a net- work Some pop-upscannot be displayedSymptom SymptomThe power cord insulation is damaged The power cord gets hot when bent or stretched• General Specifications• Input/output Standard accessories Optional AccessoriesPage Panasonic Canada Inc Panasonic System Solutions CompanyPanasonic Sales Company