Rack mounting
Install the recorder in an EIA standard rack.
Equivalent to EIA standard rack (not manufactured by Panasonic): EIA
Note:
• Use four M5 x 12 screws (locally procured) to install the recorder in a rack.
Step 1
Remove the five rubber feet from the bottom of the recorder using a flathead screwdriver.
Use a screwdriver to remove the screws holding the rubber feet.
Remove the rubber feet.
Step 2
Attach the rack handles to the rack mount brackets.
Fix them firmly using the screws for the rack handle (x4) and the washers (x4).
Screw for rack handle
Washer
Rack mount bracket
Washer
Rack handle
Step 3
Place the rack mount brackets on both sides of the recorder. Fix them firmly with the rack mount bracket fixing screws (x6).
Screw for rack mount bracket (provided)
Rack handle
Rack handle Rack mount bracket (provided)
Step 4
Install the recorder in the rack.
Fix them firmly using the rack mount screws.
Rack mount screws
M5 x 12 (locally procured)
Important:
•Keep the temperature in the rack below +45 °C
{+113 °F}.
•It is recommended to install cooling fans or equivalents to keep the temperature in the rack below +30 °C {+86 °F}.
•When installing the recorder in the rack, make a space of
1U (44 mm
•Do not block the ventilation openings or slots to prevent the recorder from overheating.
28