Paradyne 8510 DSL, 8310 MVL manual Features, H One Management Communications Controller MCC card

Hotwire DSLAM System Description

HOne Management Communications Controller (MCC) card

The chassis requires one MCC card, which is a processor card that administers and provides diagnostic connectivity to the DSL cards. It acts as a mid-level manager and works in conjunction with a Simple Network Management Protocol (SNMP) system, such as Paradyne's OpenLanet DCE Manager for HP OpenView, via its LAN port. It gathers operational status for each of the DSL cards and responds to the SNMP requests. It also has a serial port for a local user interface to the DSLAM.

For more information about the Hotwire MCC card, see the Hotwire Management Communications Controller (MCC) Card, IP Conservative, User's Guide.

HAt least one Digital Subscriber Line (DSL) or Multiple Virtual Lines (MVL) card

The chassis requires at least one DSL or MVL card, which is a circuit card that contains four RADSL or MVL modem ports, an Ethernet interface to the Internet Service Provider (ISP), and a processor/packet forwarder. The processor/packet forwarder controls the modems and forwards the packet traffic via the Ethernet and DSL or MVL interfaces. When the 8600 DSLAM chassis is fully populated, it provides a total of 68 RADSL or MVL modem ports. When the 8800 DSLAM chassis is fully populated, it provides a total of 72 RADSL or MVL modem ports.

Features

The Hotwire DSLAM system contains the following features:

HHigh speed Internet or intranet access

HRADSL ports

HMVL ports

HSubscriber authentication and security access and permission features that prevent users from accessing unauthorized services

HDiagnostic tests and performance capabilities

HPrimary network management support via SNMP agent for monitoring and traps

HTelnet for configuration and diagnostics

8000-A2-GB26-00 May 1998 1-5